CHANGXING KIND CLOTHING MATERIAL CO., LTD
Add：longshan industrial zone, shui kou, changxing, Zhejiang
In the garment interlining production process, the grey fabrics of the garment fabrics and the garment interlinings are all from the textile industry. The yarns are woven and interlaced according to certain rules to form a specific structure. There are two types of production processes for lining fabrics: single-textile fabrics and polyester-cotton blended fabrics.
[Clothing interlining knowledge] clothing interlining production process
Explanation of various process terms:
Collapse: The value of process value refers to the process of connecting bobbins or skeins, removing the impurities and defects from the surface of the yarn, forming a package with a large capacity, forming a good quality and meeting the requirements to meet the warping The demand for production.
Warping process: The warping process is a warp which integrates a predetermined number of warp yarns into a film yarn, and is wound in a lengthwise and neat direction on a warping beam so as to obtain a uniform tension and a good roundness and good quality of the warp beam.
Sizing process: The sizing process is based on the total number of plants, the warps on a number of warping beams are formed into a single piece, and the number of warp yarns according to the specified number of yarns (width * density) is wound, and the strands are weighed. Good spool, in the process of re-coiling, the yarn is sizing to increase the strength of the yarn and the hairiness of the fuselage to meet the needs of weaving production.
Pass through process: The pass through process is to pass all the warp yarns on the pulp shaft into the drop wire, heald, and reinforcement according to the requirements of the weave structure. Made of twisted head, double warp, less scars, good quality weaving shaft.
Setting of weft yarns: The weft yarns that have just fallen from the spinning mill have not yet stabilized and cannot be used immediately. In order to prevent weft and weft weaving during weaving, pre-treatment is required to stabilize the twist of the weft yarns. . There are two types of weft yarns, one is natural hygroscopicity, which is to store the weft yarn for a certain period of time, so that it can be used after the natural moisture is absorbed, and the other is to use wet steam to set the weft and place the weft yarn in a certain place. Steam is given to the wet. The latter method is fast, but it requires steam equipment.
Polyester and cotton yarns must be heat-treated before they can be used. Otherwise, weaving will produce more weirs.
Weaving process: according to the requirements of the weave and weft density of the fabric, weaving is smooth and the cloth surface is even and good.
Inspecting procedure: In the weaving, it is difficult to avoid the faults such as breaks, broken wefts, etc. After the fabric is unloaded from the machine, the inspector checks the leaf-by-leaf inspection.
Repairing procedure: The repairing procedure includes repairing holes, jumpers, and cleanliness on the surface of the fabric to complete the fabric.
Packaging process: According to grade, number of pieces, standard quantity, packaging, printing specifications, quantity, date.